INDIA | +91 - 484 - 2540075 |
Products / Optomechanics / Fiber Positioners
12 mm Post System
16 mm Post System
Post Bases
Post Clamps
Slotted Plates
Opto Mechanical Kit
Pedestal System
Heavy Duty Post System
Tools & Accessories
Kinematic Mirror Mounts
Gimbal Mirror Mounts
Cube / Prism mounts
Beam Steering Device
Lens Tube Assembly System
Rod Assembly
Lens Mounts
Filter Mounts
Polarizer Mount
Laser Mounts
Apertures
Fiber Positioners
Fiber Positioners Print
Fiber Chuck - FC - 1 Series
Model No: Length L
FC-1-20 20 mm
FC-1-30 30 mm
FC-1-50 50 mm
FC-1-65 65 mm
Suitable for bare fiber
Dia - 6mm SS V Grooved Rod
Rubber Fiber Holder
2 Nos of Rubber fiber clamb supplied with every
FC1 Fiber chuck

Fiber Chuck Holder - FCH Series
Model No:
FCH-I-20
Suitable For Bare type and FC,
    SMA series Fiber Connectors

Fiber Chuck SMA / FC / ST Fiber Holders
Model No: Connecter / Chuck Type
FC-SMA SMA Connector
FC-FC FC Connector
FC-ST ST Connector

 
Threaded Chuck Holder For Fiber Chucks / Connectors
Features Suitable Mounts Alingnment
RMS Thread / HM1 Thread Kinematic Objective Mount with RMS Thread
Aluminium Alloy Kinematic Lens Mount with Hm1 Thread
Black Anodized finish XY Objective Mount with RMS Thread
Suitable for RMS / HM1 Threaded XY Lens Mount with Hm1 Thread
    Allignment Mounts or adapters XYZ Objective Mount with RMS Thread
  Five Axis Positioner with RMS Thread
Model No: Thread Connecter / Chuck Type
FCH-TI-FC-1 RMS Fiber Chuck Fc1
FCH-TI-SMA RMS SMF Fiber Connector
FCH-TI-FC RMS FC-Fiber Connector
FCH-TI-ST RMS ST-Fiber Connector
FCH-T2-FC-1 HM1 Fiber Chuck Fc1
FCH-T2-SMA HM1 SMA - Fiber Connector
FCH-T2-FC HM1 FC - Fiber Connector
FCH-T2-ST HM1 ST - Fiber Connector

Adapters for fiber chuck
Model No:
TC-FCH
Suitable for bare fiber
Aluminium alloy
Black anodized finish
Fiber chuck FC-1 sold separately
For ø 6mm FC-1 chuck

Adapters for SMA / FC / ST Fiber Connector
Suitable for SMA / FC / ST fiber connector
Aluminium alloy
Black anodized finish
Model No: Type
TC-SMA SMA connector
TC-FC FC connector
TC-ST ST connector

HM1 / C Mount Threaded Adapter
Suitable for C mount objectives
Suitable for HM1 threaded
    Components (Lens tube / fiber holder etc.)
Black anodized finish
Aluminium alloy
Model No: Thread
TC - HM1 HM1 thread
TC - CM C Mount thread

RMS Threaded Adapter (For Microscope Objectives)
Suitable for microscope objectives
Suitable connector with RMS thread
    Components (Lens tube / fiber holder etc.)
Black anodized finish
Aluminium alloy
Model No: Thread
TC - RMS RMS thread

Clamping Fiber Adapter
Suitable for bare fiber
Magnetic clamps
Aluminium alloy
Model No: Fiber Type
TC-CFA-S Bare Fiber
TC-CFA-L Bare Fiber

Rigid Support
10 mm grooved top plate
Ø6.5 slots for M6 screws
76 mm height
Aluminium alloy
Black anodized finish
click on the image for download drawing.

XZ Positioner
XZ fiber positioner consists of precision, compact XZ stage with fiber clamping provision through the center of the Z-axis stage. The stages make use of preloaded rolling contact ball bearing guide ways for frictionless and stick-slip free positioning. The positioner is equiped with a fiber chuck and chuck holder to clamp fibers up to 1mm diameter.
Drive Type 1 Drive Type 2
Micrometer Micrometer
Resolution 10 Micron Resolution 5 Micron
Positioning Accuracy 5 Micron
10.1 mm grooved top plate
Ø 6.5 slots for mountings
76 mm height
X Travel 5mm / 2.5 mm
Z Travel 5mm / 2.5 mm
Aluminium alloy
Black anodized finish
Model No: Drive Travel
TC XZ-Mμ10 Micrometer 10Mμ 5 mm
TC XZ-Mμ5 Micrometer 5Mμ 2 mm

XYZ Positioner
XYZ fiber positioner consists of precision, compact XYZ stage with fiber clamping provision through the center of the Z-axis stage. The stages make use of preloaded rolling contact ball bearing guide ways for frictionless and stick-slip free positioning. The positioner is equiped with a fiber chuck and chuck holder to clamp fibers up to 1 mm diameter.
Drive Type 1 Drive Type 2
Micrometer Micrometer
Resolution 10 Micron Resolution 5 Micron
Positioning Accuracy 5 Micron
10.1mm grooved top plate
Ø 6.5 slots for mounting
76 mm height
X Travel 5 mm / 2.5 mm
Y Travel 5 mm / 2.5 mm
Z Travel 5 mm / 2.5 mm
Aluminium alloy
Black anodized finish
Model No: Drive Micrometer Travel
TC-XYZ-R-Mμ10 Micrometer 10μ Right 5 mm
TC-XYZ-R-Mμ5 Micrometer 5μ Right 2.5 mm
TC-XYZ-L-Mμ10 Micrometer 10μ Left 5 mm
TC-XYZ-L-Mμ5 Micrometer 5μ Left 2.5 mm

Five Axis Positioner
Five axis fiber positioner consists of precision, compact 5 axis stage with fiber clamping provision through the center of the Z-axis stage. The stages make use of preloaded rolling contact ball bearing guide ways for frictionless and stick-slip free positioning. The positioner is equipped with a fiber chuck and chuck holder to clamp fibers up to1 mm diameter
Drive Type 1 Drive Type 2
Micrometer Micrometer
Resolution 10 Micron Resolution 5 Micron
Positioning Accuracy 5 Micron
10.1mm grooved top plate
Ø 6.5 slots for mounting
76 mm height
X Travel 5 mm / 2.5 mm
Y Travel 5 mm / 2.5 mm
Z Travel 5 mm / 2.5 mm
Aluminium alloy
Black anodized finish
ø1 Tilting range ± 2°
ø2 Tilting range ± 2°
Model No: Drive Micrometer Travel
TC-5AR-Mu10 Micrometer 10μ Right 5 mm
TC-5AR-Mu5 Micrometer 5μ Right 2.5 mm
TC-5AR-Mu10 Micrometer 10μ Left 5 mm
TC-5AR-Mu5 Micrometer 5μ Left 2.5 mm
 

Laser Fiber Coupler
Laser fiber coupler consists of microscope objective and XYZ fiber mount to achieve maximum coupling of laser beam to fiber tip. The device can be either post mounted or base mounted.
Fiber Chuck/ FC Connector Compatible
3 mm XY adjustment
10 mm linear movement
Compatible with std microscope objective
M6 Mounting Hole
Post/base mountable
Black anodized finish
Model No: Connector Type
LFC - 1 Fiber Chuck (FC1)
LFC - 1 FC FC, Connector
 
 
Click here for ENQUIRY
Home l Products l Supports l Company l Contact Us
Follow us
Privacy Policy l Terms & Conditions
© 2015 Holmarc Opto-Mechatronics (P) Ltd. All rights reserved.
Home