MXYTS series motorized stages are manufactured in five different sizes for general purpose positioning and measurement applications. The stages are supplied with or without mounting holes as per requirement. The stages are supplied with or without mounting holes as per requirement. Drive leadscrew along with motor is mounted by the side of the stage. One end of the lead screw is attached to a rotary knob for manual adjustments, whenever required. Limit switches are fixed at both extremes for home and far end location. Crossed roller based linear guides are used for achieving precision linear motion. The guide ways are factory pre-loaded to eliminate play and wobble. Coefficient of friction is less than 0.003. Standard stages are constructed in aluminium alloy and finished by black anodizing.
# controller sold separately [ read more + ]
Straight line accuracy | : | 0.010 mm |
Positioning accuracy | : | 0.005 mm |
Repatability (unidirectional) | : | 0.002 mm |
Backlash | : | 0.02mm (Max) |
Resolution | : | 0.625 micron (1/16 microstep) |
Drive | : | Precision lead screw |
Mounting holes | : | M6 mounting holes |
Load Capacity | : | 20 Kg |
Base mountable |
XY moving platforms |
XY dispensing units |
Inspection microscopes |
Hardness testing |
Induction hardening |
Measuring microscope |
Home | Products | Supports | Company | Contact Us
|
©2024 Holmarc Opto-Mechatronics Ltd. All rights reserved.