Products    /    Lab Equipments   /    SILAR Coating System with Stirrer
SILAR Coating System

with Stirrer

Model: HO-TH-03S
200 rpm stirrer speed possible
Temperature is common for all beakers

Holmarc’s SILAR Controller with Stirrer, Model: HO-TH-03S has a motorized substrate holder which can be used to stir the solution. By rotating the substrate along with the holder at desired speed, the solution can be kept stirred during the dipping process. The rotation speed is programmable from 2 - 200 rpm. The dipping speed, dip duration, retrieval speed and dry duration can be set for each beaker. There is a controlled heater, which is common for 6 beakers and the temperature can be set up to 80°C from ambient. The device is compact and complete with a footprint of 376 x 330 mm.

Holmarc’s SILAR coating unit is an instrument with which a thin film is deposited on a glass substrate due to a chemical process called successive ion layer adsorption and reaction (SILAR). The technique involves multiple dipping of the substrate in a given solution and de-ionized water, temperature of both can vary from case to case.

SILAR coating system has been designed to automate the entire process to avoid operator fatigue and errors associated with it. In manual SILAR process, the operator has to perform hundreds of repetitive dipping into the solution and water.

It is very difficult to control dip duration and number of dips in a manual process which may last for hours. In our automated unit, all that an operator needs to do is just clamp the substrate on to the holder and program the controller with required parameters.




    Actuator     :     Stepper motor
    Drive mechanism     :     Lead screw
    Dip duration     :     0 - 99 seconds / minutes / hours
    Number of dips     :     1 - 999
    Hot plate temperature     :     Ambient to 80°C
    Stirrer speed     :     Adjustable 2 rpm - 200 rpm
    PC connectivity     :     Serial port (RS 232)
    Stroke length     :     75 mm
    Rotary speed     :     0 - 60 deg / sec
    Drawing speed (Manual mode)     :     200 micron / sec    -    16mm / sec
    Drawing speed (PC mode)     :     2 - 16000 micron / sec
    Weight (appx.)     :     55 Kg
This device can be customized as per requirement. Holmarc has developed models where a controlled heater is used for keeping the solution at specified temperature.


Home | Products | Supports | Company | Contact Us

Privacy Policy | Terms & Conditions


©2016 Holmarc Opto-Mechatronics (P) Ltd. All rights reserved.

Follow us