Products    /    Microscope & Imaging Instruments   /    2D Transfer System with Digital Microscope 01
2D Transfer System

with Digital Microscope

Model No: HO-2DTS-DM-01
1.   Base plate with levelling foot

    Material :     Magnetic SS
    M6 Tapped holes at 25mm x 25mm grid

2.   Digital microscope with dual post setupwith coarse adjustment and fine focusing stage

    Optical system     Finite corrected
    Illumination     Type     Co-axial illumination
    Light source     White LED
    Adjustable intensity
    Objective Zoom Lens     Manual Zoom Lens Assembly
    Magnification   =   0.7X - 4.5X
    Zoom Ratio   =   6.5:1
    1X CCD Adapter
    1X Objective
    Detent at 0.7X, 1X, 1.5X, 2X, 2.5X, 3X, 3.5X, 4.0X, 4.5X
    Auxiliary objective     2X, working distance   =   39mm
    Field of View     ~4.07 mm x 3.05 mm @ 0.7X position with 2X Auxiliary lens
    ~0.63 mm x 0.475 mm @ 4.5x position with 2X Auxiliary lens
    Magnification     Maximum Magnification @ Camera sensor   =   9X (with 2X auxiliary lens)
    Maximum Magnification @ 22” screen   =   ~ 700X (depends on the size of active area of the screen)

3.   Glass / sample Holder

4.   Image grabbing & Analysing software

    1. 1.5X auxiliary objective
    Working distance = 50mm
    2. 4X auxiliary objective
    Working distance = 10mm
Camera Specifications

    Sensor :     5MP CMOS, Color
    Optical format :     1 / 2.5”
    Sensor size :     5.7mm x 4.28mm (7.13mm diagonal)
    Active pixels :     2592 H x 1944 V
    Pixel size :     2.2 um x 2.2 um
    Frame rate :     6 - 8 fps @ full resolution
    Sensitivity :     1.4V / Lux - sec
    Exposure time :     0.058 ~ 3000 ms
    Spectral range :     380 - 650 nm
    SNR :     38.1 dB
    Dynamic range :     70.1 dB
    Shutter :     Electronic rolling shutter
    Data interface :     USB 2.0
    Data format :     8 Bit / 12 Bit RAW
    Picture format :     JPEG / BMP / PNG / RAW
    Software :     Image Analyzer
5.   XYZ theta sample stage with heater & Vacuum chuck (1 set)
    XYZ stage
    Mounting hole :     M6 tapped holes
    XY Travel :     25 mm
    Z travel :     5 mm
    Straight line accuracy :     +/- 3.5 um
    X axis resolution :     1 um (Digital Micrometer)
    Y axis resolution :     5 um
    Z axis resolution :     10 micron
    Guide way :     Precision V grooved guide way
    X axis drive :     Digital Micrometer
    Y axis drive :     Micrometer
    Z axis drive :     Micrometer
    Construction :     Aluminium alloy
    Finish :     Black anodized
    Rotation stage
    Top plate diameter :     75 mm
    Readout :     0.1 degree
    Construction :     Aluminium alloy
    Finish :     Black anodized
    Tapped holes on the top plate :     M6
    Mounting holes on the base :     M6 CBR
    Design :     Modular
    Coarse travel :     360 degree
    Fine travel :     +/- 4 degree
    Drive :     Micrometer
    Vacuum chuck and Heater with temperature controller
    Sample plate diameter :     40 mm
    Temperature range :     RT - 250º C
    Temperature increment :     1º C
    PID Controller
    Vacuum provision to hold the samples
    Vacuum Pump
6.   XYZ Stamping stage with tilting platform (1set)
    Top plate size :     90 x 90 mm
    X axis travel :     25 mm
    Y & Z axes travel :     10 mm
    M6 tapped holes on the top plate
    Y axis resolution :     1 um (Digital Micrometer)
    X & Z axes resolution :     5 um
    Guide way :     Precision V grooved guide way
    Y axis drive :     Digital Micrometer
    X & Z axes drive :     Micrometer
    Tilting platform drive :     Leadscrew
    Construction :     Aluminium alloy
    Finish :     Black anodized


Home | Products | Supports | Company | Contact Us

|

©2024 Holmarc Opto-Mechatronics Ltd. All rights reserved.