Products    /    Microscope & Imaging Instruments   /    2D Transfer System with Digital Microscope 02
2D Transfer System

with Digital Microscope

Model No: HO-2DTS-DM-02
1. Base plate with levelling foot

    Material :     Magnetic SS
    M6 Tapped holes at 25mm x 25mm grid

2. Digital High-resolutionZoom microscope with dual post setup and Z focusing stage (1 set)

    Optical system :     Microscope objective with zoom system
    Observation Method :     Bright field
    Illumination :     Coaxial top illumination
    Illumination system :     High bright white LED, Intensity adjustable
    Focusing :     Manual
    Zoom magnification :     0.5 - 5X
    Zoom NA :     0.023 - 0.107 mm
    Microscope objective
    Objective :     Long working distance Plan Apochromatic
    Magnification :     5 X
    Numerical Aperture :     0.15
    Working distance :     35 mm
    Total magnification :     2.5X - 25X
    Camera Specifications
    Optical format :     1 / 2.5” CMOS
    Active imager size :     5.70 mm x 4.28 mm
    Active pixels :     2592 x 1944 (5Mp)
    Pixel size :     2.2 um x 2.2 um
    Shutter type :     Electronic Rolling Shutter (ERS)
    Frame rate :     Full resolution - 7 fps, 640 x 480 (BIN) - 26.7 fps
    Spectral response :     380 - 650 nm
    Exposure time :     0.072 ms - 3000 ms
    Image format :     RAW, BMP, JPG, PNG
    Operating temperature :     -30ºC to +70ºC
    Sensitivity :     1.76V / lux - sec (550nm)
    Power consumption :     381 mW at 15 fps full resolution
    Interface :     USB 2.0
    Lens mount :     C-mount
    1. LWD Plan Apo 10X microscope objective
    NA :     0.30
    Working distance :     34 mm
    FOV eyepiece :     2 mm
    FOV camera :     0.57 mm x 0.428 mm
    2. LWD Plan Apo 20X microscope objective
    NA :     0.35
    Working distance :     29 mm
    FOV eyepiece :     1 mm
    FOV camera :     0.285 mm x 0.214 mm
    3. LWD Plan Apo 50X microscope objective
    NA :     0.50
    Working distance :     17 mm
    FOV eyepiece :     0.4 mm
    FOV camera :     0.114 mm x 0.0856 mm
3. XYZ theta sample stage with heater & Vacuum chuck (1 set)
    XYZ stage
    Mounting hole :     M6 tapped holes
    XY Travel :     25 mm
    Z Travel :     5 mm
    Straight line accuracy :     +/-3.5 um
    X axis resolution :     1 um (Digital Micrometer)
    Y axis resolution :     5 um
    Z axis resolution :     10 micron
    Guide way :     Precision V grooved guide way
    X axis drive :     Digital Micrometer
    Y axis drive :     Micrometer
    Z axis drive :     Micrometer
    Construction :     Aluminium alloy
    Finish :     Black anodized
    Rotation stage
    Top plate diameter :     75 mm
    Readout :     0.1 degree
    Construction :     Aluminium alloy
    Finish :     Black anodized
    Tapped holes on the top plate :     M6 Tapped holes
    Mounting holes on the base :     M6 CBR
    Design :     Modular
    Coarse travel :     360 degree
    Fine travel :     +/- 4 degree
    Drive :     Micrometer
    Vacuum chuck and Heater with temperature controller
    Sample plate diameter :     40 mm
    Temperature range :     RT - 250ºC
    Temperature increment :     1ºC
    PID Controller
    Vacuum provision to hold the samples
    Vacuum Pump
4. XYZ Stamping stage with tilting platform (1set)

    Top plate size :     90 x 90 mm
    X axis travel :     25 mm
    Y & Z axes travel :     10 mm
    M6 tapped holes on the top plate
    Y axis resolution :     1 um (Digital Micrometer)
    X & Z axes resolution :     5 um
    Guide way :     Precision V grooved guide way
    Y axis drive :     Digital Micrometer
    X & Z axes drive :     Micrometer
    Tilting platform drive :     Leadscrew
    Construction :     Aluminium alloy
    Finish :     Black anodized


Home | Products | Supports | Company | Contact Us

|

©2024 Holmarc Opto-Mechatronics Ltd. All rights reserved.

Follow us