Products    /    Motorized Linear and Rotation Stages    /    Motorized Linear Stage    /    RCMTS-250 Series
Motorized Translation Stages

RCMTS-250 Series
Aluminum alloy B51S
Precision Lead ball screw

Carriages (load bearing surface of the stage which moves) of RCMTS-250 stages have 250 mm x 250 mm size. Standard models are available for up to 750 mm traverse. There are two linear guideways for each axis and these are re-circulating type with balls. Drive is by ball screw-stepper motor combination. Servo motors can also be made available for specific applications where speed requirements are not possible with steppers.

Z-axis: In these stages, in vertical configuration, if the load is more than 15 kgs, the carriage may come down under gravity when power to the motor is switched off. This is when ball screw is directly attached to the stepper motor. If the load to be lifted is more than 15 kgs, it is advisable to use our Z axis stages with a gear box (1:6 ratio) in between motor and ball screw. Though this reduce speed in Z axis, load capacity increases considerably. Please see the tables and chart below for details.

# controller sold separately    [ read more + ]



    Straight Line Accuracy :     +/- 30 Micron over 300 mm travel
    Drive :     Precision Lead ball screw
    Construction :     Aluminium Alloy B51S
    Finish :     Black anodized
    Tapped Holes on Carriage :     M6 Tapped Holes
    Mounting Holes on the base :     M6 Tap and M6 CBR
    Design :     Modular Type
    Configuration :     Multi axis
    Travel :     100 to 1000 mm
    Carriage Size :     250 mm x 250 mm
    Load Capacity :     Up to 150kg vertical







Drive Details 4 mm Pitch Ball Screw 4 mm Pitch Ball Screw
with Magnetic brake *
Positioning Accuracy 0.02 mm 0.01 mm
Repeatability 0.01 mm 0.01 mm
Resolution 0.00125 (Micro Step Mode) 0.00125 (Micro Step Mode)
Speed 16 mm / sec (4RPS) 16 mm / sec (4RPS)
* Feature : Magnetic break helps stages carriage from sudden falling while loading heavy load in Z axis
4 mm Pitch ball Screw
Model No:
Travel Length Load Capacity
X - Axis
Load Capacity
Z - Axis *
Drawing Price ( $ )
RCMTS250-100-2 100 mm 410 mm 100 kg 15 kg - 1792.00
RCMTS250-200-2 200 mm 510 mm 100 kg 15 kg - Get Quote
RCMTS250-250-2 250 mm 560 mm 100 kg 15 kg - Get Quote
RCMTS250-300-2 300 mm 610 mm 100 kg 15 kg - Get Quote
RCMTS250-500-2 500 mm 920 mm 95 kg 15 kg - Get Quote
RCMTS250-750-2 750 mm 1170 mm 90 kg 15 kg - Get Quote
RCMTS250-1000-2 1000 mm 1420 mm 90 kg 15 kg - Get Quote
    * (maximum holding kg weight at off condition)


4 mm Pitch ball Screw
with Magnetic brake
Model No:
Travel Length Load Capacity
X - Axis
Load Capacity
Z - Axis
Drawing Price ( $ )
RCMTS250-100-B 100 mm 410 mm 150 kg 120 kg - 1959.00
RCMTS250-200-B 200 mm 510 mm 150 kg 120 kg - Get Quote
RCMTS250-250-B 250 mm 560 mm 150 kg 120 kg - Get Quote
RCMTS250-300-B 300 mm 610 mm 150 kg 115 kg - Get Quote
RCMTS250-500-B 500 mm 920 mm 140 kg 90 kg - Get Quote
RCMTS250-750-B 750 mm 1170 mm 135 kg 90 kg - Get Quote
RCMTS250-1000-B 1000 mm 1420 mm 135 kg 85 kg - Get Quote
Accessories

Base Plate Price ( $ ) Vertical Bracket Price ( $ ) Horizontal Bracket Price ( $ )
BP-RCMTS250-100 260.00 VAB-RCMTS250-100 271.00 HAB-RCMTS-250
Size : 250 x 250 mm
140.00
BP-RCMTS250-200 358.00 VAB-RCMTS250-200 374.00
BP-RCMTS250-250 440.00 VAB-RCMTS250-250 453.00
BP-RCMTS250-300 481.00 VAB-RCMTS250-300 498.00
BP-RCMTS250-500 563.00 VAB-RCMTS250-500 574.00
BP-RCMTS250-750 782.00 VAB-RCMTS250-750 819.00
BP-RCMTS250-1000 901.00 VAB-RCMTS250-1000 930.00


Adapter Plate



Base Plate



Angle Bracket

Home | Products | Supports | Company | Contact Us

|

©2022 Holmarc Opto-Mechatronics Ltd. All rights reserved.

Follow us