Products    /    Motorized Linear and Rotation Stages    /    Motorized Linear Stage    /    RCMTS-35 Series
Motorized Translation Stages

RCMTS-35 Series
Precision leadscrew
Aluminum alloy B51S

These stages use re-circulating type ball bearing guideways along with leadscrews positioned above the guideways as shown in the drawing. This configuration helps to keep the footprint as minimum as possible. In this case, width of the stage could be reduced to 35mm. Construction is in aluminum alloy with black anodized finish.

There are two options for leadscrew pitch, 1mm and 2mm. For those applications where greater speed is required, 9 mm pitch leadscrew can be considered.

# controller sold separately    [ read more + ]



    Straight Line Accuracy :     +/- 20 Micron over 200 mm travel
    Drive :     Precision Lead screw
    Construction :     Aluminium Alloy B51S
    Finish :     Black anodized
    Tapped Holes on Carriage :     M4 Tapped Holes
    Mounting Holes on the base :     M6 Tap and M4 CBR
    Design :     Modular Type
    Configuration :     Multi axis
    Travel :     50 to 150 mm
    Carriage Size :     35 mm x 35 mm
    Load Capacity :     2 kg vertical on X Axis
    Lead screw :     1.25 mm pitch
    Motor :     Stepper motor (42mm size)

Drive Details 1.25 mm Pitch Precision
Lead Screw
Positioning Accuracy 3.125 micron
Repeatability 3.125 micron
Resolution 0.000390 (Micro Step Mode)
Speed 5 mm / Sec.
1.25 mm Pitch Leadscrew


Model No: Travel Load Capacity
X - Axis
Load Capacity
Z - Axis
Drawing Price ( $ )
RCMTS35-50-1 50 mm 2 kg 500 gm 534.00
RCMTS35-75-1 75 mm 2 kg 500 gm 600.00
RCMTS35-100-1 100 mm 2 kg 500 gm 650.00
RCMTS35-150-1 150 mm 2 kg 500 gm 800.00


Adapter Plate



Base Plate



Angle Bracket

Home | Products | Supports | Company | Contact Us

|

©2022 Holmarc Opto-Mechatronics Ltd. All rights reserved.

Follow us