Products    /    Breadboards, Tabletops, Rails & Carriages    /    Honeycomb Breadboards    /    Honeycomb Tabletops - Non Magnetic
Honeycomb Tabletops

Non Magnetic

Research grade dynamic rigidity
Top and bottom part constructed by 304 grade SS

Honeycomb non magnetic tabletops are used where the Optical experiment setups to be built on top of the tabletops are sensitive to magnetism. These special tabletops are constructed of 304 grade stainless steel on top and bottom part. This alloy of steel contains less iron than typical stainless steel, which reduces its ferromagnetic properties. The honeycomb structure is constructed from aluminium.



        5 mm thick non-magnetic SS top skin (SS304)
        Bottom skin made of 5 mm thick epoxy coated non-magnetic steel (SS304)
        0.25 mm thick aluminium honeycomb core
        Core cell size of 6 sq. cm.(approx.)
        Nylon cups under each tapped hole
        +/- 0.1 mm flatness on top over 300 mm x 300 mm area (non-cumulative error)
        M6 tapped holes at 25 mm grid
        Distance of the first raw of mounting holes from the edge is 37.5 mm
        Semi solid epoxy bonding
        Side walls finished with black form sheet having matte finish
        Compressed wooden particle boards as side walls to dampen acoustic vibrations.






Model No Length ( cm ) Width ( cm ) Height ( cm ) Price $
TTNM 90-90 90 90 15 1475.00
TTNM 120-90 120 90 15 1900.00
TTNM 120-120 120 120 15 2534.00
TTNM 180-120 180 120 20 3800.00
TTNM 240-120 240 120 20 5067..00
TTNM 300-120 300 120 20 6334.00
TTNM 180-150 180 150 20 4750.00
TTNM 240-150 240 150 20 6334.00
TTNM 300-150 300 150 20 7917.00
TTNM 360-150 360 150 20 9500.00


Home | Products | Supports | Company | Contact Us

|

©2022 Holmarc Opto-Mechatronics Ltd. All rights reserved.

Follow us