Products    /    Microscope & Imaging Instruments   /    Inverted Fluorescence Microscope2
Inverted Fluorescence Microscope 2

Research Grade
Model No: HO-AMS-FL5000CX

Applications

    Laser Scanning

    Fluorescence

    Microscopy

    Multichannel Fluorescence



    Equipment Type :     Inverted
    Optical System :     Colour Corrected Infinity Optical System
    Observation :     Large LCD touch display
    Sample Stage :     Stepper motor controlled 120 x 120 mm with provision to hold well plate, Ø35 mm, Ø54 mm, and Ø65 mm petri dish, 4 glass slide etc.
    Objectives :     4 Nos. 5x, 10x, 20x, , 50x , 100x oil immersion
    Turret :     Motorized positioning and 4 slots for keeping
    Fluorescence filter wheel unit :     2 deck ( 8 Slot each )
    Condenser :     Abbe condenser
    Focus :     Motorized Stepper motor controlled
    Illumination :     50 W Quartz halogen ( 150W Xe Arc Lamp Optional )
Camera Specifications

    Sensor type :     Cooled 20MP CMOS for Imaging
    Sensor model :     Sony
    Quantum efficiency :     84% @ 535 nm
    Resolution :     5472(H) x 3648(V)
    Pixel size :     2.40μm x 2.40μm
    Sensor size :     15.86 mm; 1inch
    Shutter mode :     Rolling
    Read noise :     < 1e-
    Cooling :     Forced air (Ambient at +25°C) : -15°C
    Frame rate :     14fps @ 5472 x 3648,   53fps @ 2736 x 1824,   67fps @ 1824 x 1216
    Binning :     2 x 2,   3 x 3,   4 x 4
    Exposure settings :     Auto / Manual
    Exposure time :     18us - 1hour
    Picture format :     JPG / PNG / TIFF / DICOM
    Data interface :     USB 3.0
    Bit depth :     16bit / 8bit
    Camera size :     85 mm x 85 mm x 109mm
    Power supply :     12 V
    Controller :     Joy stick type
    Ports :     Two standard ports are available for camera and fiber coupling / galvano attachment
    HEATING STAGE for the glass slide (Microscope)
    Temperature range     RT - 100°C
    Temperature readout     Thermocouple
    Temperature control Accuracy     +/- 1°C
    Temperature control electronics include PID controller and power supply
    Holder will be able to hold normal microscope slides, rectangula Reviewed


Home | Products | Supports | Company | Contact Us

|

©2023 Holmarc Opto-Mechatronics Ltd. All rights reserved.

Follow us