Products    /    Motorized Linear and Rotation Stages   /    Pitch & Yaw Positioning Mechanism
Pitch & Yaw Positioning Mechanism

for Subsonic Wind Tunnel
Model: HO-PY-WT01

Holmarc’s Pitch & Yaw Positioning Mechanism for Subsonic Wind Tunnel. Test section size is 600 mm x 600 mm x 1200 mm. Maximum load due to the test model and instrumentations will not exceed 1.5 kgs during the test run. Blockage ratio will be less than 2% due to the mechanism.



    Pitching Angle :     0 to 75 degrees
    Yaw Angle :     +/- 20 degrees
    Speed range :     2 to 35 m/s
    Electronic controller for pitching and yawing



Home | Products | Supports | Company | Contact Us

|

©2018 Holmarc Opto-Mechatronics (P) Ltd. All rights reserved.

Follow us