Manual micromanipulator : 8 Nos. |
Axes : 4 (XYZ and Tilt) |
X travel : 10 mm, Y travel : 10 mm, Z travel : 10 mm |
Tilt : +/- 3 degree |
Magnetic movement - like magnetic base |
Probe holding mechanism |
2. Base Plate, Manipulator Magnetic SS base plate, adjustable supporting stands |
3. XYZ Manual sample holder with 4” SS chuck = 1 set |
X travel : 25 mm, Y travel : 10 mm, Z travel : 10 mm |
4. Probe station binocular microscope with Boomstand and Z focusing stage= 1 set |
Optical system : Infinity corrected |
Observation Method : bright field |
Illumination : Reflected (Co-axial and Angled) |
Illumination system : High bright white LEDs |
Nosepiece : revolving, quadruple with positive precision click stops |
Viewing head : Siedentopf Trinocular head, 30 degree, 48-75mm IP adjustment |
Eyepiece : 10X Wide field eyepiece, FN = 20mm, dioptre adjustable. |
Focusing : Manual Z stage |
Objectives : LWD Plan Apo 5X (NA = 0.14, WD = 34mm, FOVeyepiece = 4mm, FOVcamera = 1.14mm x 0.856mm, 1.426 diagonal) |
1. Probe Station with 8 micro-manipulators |
2. Base Plate, Manipulator Magnetic SS base plate, adjustable supporting stands |
3. XYZ Manual sample holder with 4” SS chuck |
4. Probe station binocular microscope with BOOM stand and Z focusing stage |
Camera Specifications |
Optical format : 1/2.5” CMOS |
Active imager size : 5.70mm x 4.28mm, 7.13mm diagonal |
Active pixels : 2592 x 1944 (5Mp) |
Pixel size : 2.2 x 2.2 um |
Color filter array : RGB Bayer pattern |
Shutter type : Electronic rolling shutter(ERS) |
Frame rate : Full resolution -up to8fps, VGA -upto 70 fps |
ADC resolution : 12- bit, on-chip |
Pixel dynamic range : 70.1 dB |
Operating temperature : -30°C to +70°C |
Power consumption : 381mW at 15 fps full resolution |
Interface : USB2.0 |
Home | Products | Supports | Company | Contact Us
|
©2022 Holmarc Opto-Mechatronics Ltd. All rights reserved.