Hologram recombination machines are used to transfer the image from the Nickel shim (master) to special plastics namely polycarbonate sheets. The transfer quality on the plastic is highly dependent on the temperature, pressure and machine used. A bigger master can be made from smaller master using this machine.
This is a compact recombination machine with maximum hologram master size 30 mm x 30 mm.
The maximum tonnage is up to 4 Tons. We have provided motorized travel in X & Y directions for the polycarbonate sheet holder. Maximum travel is up to 400 x 400 mm.
The unique design of the press ensures no movement of the shim during continuous operation.
The equipment can be controlled by PC using a user friendly software and also by an inbuilt Front Panel Controller. The shim can be heated for up to 150 Degree Celsius before stamping.
N2 nozzle is incorporated with the machine to clean the recombination plates / area.Recombining Area | : | 400 mm x 400 mm |
Plastic Sheet Area | : | 430 mm x 43 0mm |
Maximum Image Size | : | 30 mm x 30 mm |
Working Pressure (Hydro-pneumatic Cylinder) | : | 4 tons |
X - Y Stage travel | : | 400 mm x 400 mm |
Controller | : | PC and Manual - Front Panel Controller |
Resolution | : | 10 microns |
Heater | : | Electrical heater controlled by microcontroller based temperature controller with digital display. |
Maximum Temperature | : | 150°C |
Power Supply Required | : | 230 V AC, 50 Hz, Single Phase |
Construction | : | Solid Steel construction |
Holmarc Classic 2D / 3D Mastering System is intended to create high quality forgery proof holograms. We have complete solution for creating high security hologram masters.
Hologram recombination machines are used to transfer the image from the Nickel shim (master) to special plastics namely polycarbonate sheets.
Home | Products | Supports | Company | Contact Us
|
©2022 Holmarc Opto-Mechatronics Ltd. All rights reserved.