Holmarc offers wide range of peristaltic pumps for dispensing, filling, dosing, sampling and transferring applications. The advantage of using peristaltic pump is that no contamination will occur to the fluid or to the pump. To use a different fluid, all you need to do is to change the tubing used to pump the fluid. The flow rate will be accurate and there will not be any reverse flow or back flow. Our equipment is ideal to use with corrosive or viscous liquids. Instant start or stop and reverse facility are available in our standard model.
Peristaltic pump from Holmarc are driven by heavy duty stepper motors along with the micro stepping drives. Drive and control electronics are assembled in compact housing along with the pump mechanism.
Front panel of the device is provided with the LCD and keyboard for programming the flow parameters. Replacement mechanism for flow tube is made as user friendly as possible. The device is handy compact and portable and work silently. Holmarc peristaltic pumps are inexpensive to maintain and are easy to install and operate.
Peristaltic pumps do not contaminate fluids as none of the pump components comes in contact with the fluids other than the tube. Holmarc's peristaltic pumps are inexpensive to maintain and are easy to install and operate. Each pump can run in any sequence with delay in between. And this sequence can be repeated multiple times
|Model : HO LS PP M01|
|Flow rates||:||0.5 to 5 ml / min|
|Flow factor||:||0.01 to 9.99|
|Speed||:||0.2 to 5 rpm|
|Power supply||:||220 - 240v 50/60 Hz supply|
|User Interface||:||PC Mode|
|Tubing||:||Platinum cured Silicone tubing|
|Tube length||:||50 cm (Longer tube can be purchased at additional cost)|
|Contamination free pumping|
|No reverse flow or back flow|
|Accurate and repeatable flow rate|
|Instant start or stop facility|
|Complete isolation of pumped fluid|
|Ergonomic design, Ease to use|
|Almost maintenance free|
|Clear, easily read LCD illuminated display|
|Stepper Motor used for driving the system|