Products    /    Motorized Linear and Rotation Stages   /    Radiography Multi Axis Manipulator
Radiography Multi Axis Manipulator

Conventional, Digital & CT
Model: HO-RGMAM-600R

Conventional and digital radiography techniques have been widely used by industries for routine and in-service inspection for non destructive testing (NDT).

Automated positioning and movement systems (manipulators) enable quality radiography images with minimum number of exposures.

Holmarc manufactures six axis manipulators for X-ray & CT applications as standard products. The system is equipped with six motorized axis and two / three manual stages. On one of the arms, X-ray source (100 kgs approx.) can be mounted while flat panel with lead mask (200 kgs approx.) can be mounted on the other arm. Both these arms have X-Z-movement (300 mm) with accuracy of 50 micron and option to have two more additional motorized axis. At the center of these two arms, the sample stage is mounted with motorized X, Y, Z and (rotation) stages. The manipulator makes the alignment of the source, detector and sample easy and precise. The position (rotation) of sample and automatically acquired radiography images for each are used to create computed tomogram of objects.

Optional features such as motorized shutters, mounts for additional sources and detector etc. are available. We can tailor the system to our customers needs as well.



        Remote operation of the X-ray or CT system with reduced operator intervention
        Fast, precise and efficient positioning of samples, source and detector.
        Easy alignment
        Quality X-ray images with minimum number of exposures
        Faster CT with reduced artifacts
        Low cost and easy maintenance


Source Arm

    Vertical height adjustment :     600 mm
    Positioning Accuracy :     1 mm
    Drive :     Ball screw with manual gear box

Detector Arm

    Vertcal height adjustment :     600 mm
    Positioning Accuracy :     1 mm
    Drive :     Ball screw with manual gear box
    Linear axis travel :     600 mm
    Positioning accuracy :     0.05 mm

Object Arm

    Number of axis :     4 (X,Y, Z, Ө)
    Positioning Accuracy :     0.05 mm
    X stage travel :     600 mm
    Y stage travel :     300 mm
    Z stage travel :     600 mm
    Theta stage travel :     360 degree
    Accuracy :     0.1 degree
    Drive :     All axis motorized
    Maximum object size :     250 x 600 mm
    Objects held by :     Self centering chuck
Object Manipulator

Holmarc manufactures multi-axes linear and rotary stages for manipulating objects for NDT and other applications. Two standard models are described in this section. Both the models have four axes of freedom, three linear and one rotary. There are hand knobs fitted behind the motors for manual adjustments when ever required. Though fitted with stepper motors in standard models, brush less DC motors can as well be supplied along with rotary or linear encoder depending on the application needs.





Motorized X, Y, Z & Ө Stage

Model : HO-RGMAM-COM3AR


    X Travel :     25 mm
    Y Travel :     25 mm
    Z Travel :     25 mm
    Theta Travel :     360 °
    Positioning accuracy :     0.05 mm
    Maximum object size :     100 x 100 x 100 mm
    Object Locking Mechanism :     Self centering Jaw



Motorized X, Y, Z & Ө Stage

Model : HO-RGMAM-OM3AR


    X Travel :     25 mm
    Y Travel :     25 mm
    Z Travel :     25 mm
    Theta Travel :     360 °
    Positioning accuracy :     0.05 mm
    Maximum object size :     100 x 100 x 100 mm
    Object Locking Mechanism :     Self centering Jaw



Home | Products | Supports | Company | Contact Us

|

©2024 Holmarc Opto-Mechatronics Ltd. All rights reserved.