Holmarc’s Spin Coater with glove box compatible, Model no: HO-TH-05GT is a dedicated system suitable for use inside glove box to spin coat small substrates in research laboratories with well controlled spin process parameters. This model offers separate controller which has user friendly front panel having 5 inch touch screen display for programming the spin process. The user can, hence operate the spin coater in the remote location. A two way Start and Stop switches enables spin coater to be turned on or off within glove box or using controller. Spin duration, spin speed, acceleration, etc. are all programmable parameters through the front panel of the controller. The spin head actuator is a precision DC servo motor with accurate speed and acceleration control. A vacuum chuck powered by oil-less vacuum pump holds the substrate at the spinning head. Three sets of nylon anti-corrosive vacuum chucks are provided along with the equipment for holding substrate from 15 x 15 mm square to 100 x 100 mm square.
The nylon made spin chamber is compact within a footprint of 296 x 266 mm and easy to install into the glove box. A transparent cover on top of the chamber protects the surroundings by keeping the spin off solution inside. All components in the device are corrosion protected to make it clean glove box compatible.
Actuator | : | Brushless DC motor |
Spinning speed | : | 60 - 10000 rpm |
Power input | : | 230V, 50Hz |
Read out | : | 5 Inch Touchscreen |
Spin chamber | : | Nylon |
Acceleration | : | 5 - 2000 rpm / sec |
Spinning Speed Accuracy | : | < 5% |
Programmable parameters | : | Speed , Acceleration, Dwell time and No. of steps |
Maximum no of steps | : | 10 |
Program memory | : | Infinite |
Weight (appx.) | : | 34 Kg |