Products    /    Breadboards, Tabletops, Rails & Carriages    /    Honeycomb Breadboards    /    Standard Breadboards - Non Magnetic
Honeycomb Breadboards

Standard Breadboards - Non Magnetic

Pattern of M6 holes spaced by 25mm
Nonmagnetic SS top skin of thickness 5mm

Non magnetic breadboards are used where the Optical experiment setups to be built on top of the Breaboards are sensitive to magnetism. These special breadboards are constructed of 304 grade stainless steel on top and bottom part. This alloy of steel contains less iron than typical stainless steel, which reduces its ferromagnetic properties. The honeycomb structure is constructed from aluminium.



        5 mm thick non-magnetic SS top skin (SS304)
        Bottom skin made of 5 mm thick epoxy coated non-magnetic steel (SS304)
        0.25 mm thick aluminium honeycomb core
        Core cell size of 6 sq. cm.(approx.)
        Nylon cups under each tapped hole
        +/- 0.1 mm flatness on top over 300 mm x 300 mm area (non-cumulative error)
        M6 tapped holes on 25 mm grid
        Distance of the first raw of mounting holes from the edge is 37.5 mm
        Semi solid epoxy bonding
        Side walls finished with black form sheet (matte finish)
        Compressed wooden particle boards as side walls to dampen acoustic vibrations.






Model No Length ( mm ) Width ( mm ) Height ( mm ) Price ( USD )
BBNM 60-30 600 300 60 317.00
BBNM 60-60 600 600 60 634.00
BBNM 90-60 900 600 100 950.00
BBNM 90-90 900 900 100 1425.00
BBNM 120-90 1200 900 100 1900.00
BBNM 120-120 1200 1200 100 2534.00
BBNM 180-120 1800 1200 100 3800.00


Home | Products | Supports | Company | Contact Us

|

©2022 Holmarc Opto-Mechatronics Ltd. All rights reserved.

Follow us