Products    /    Breadboards, Tabletops, Rails & Carriages    /    Tabletop Supports    /    Rigid Tabletop Support with Height Adjustment
Rigid Tabletop Support

with Height Adjustment
Height adjustment range +300 mm
Caster wheel and knob locking mechanism

This support system has four vertical members made from rectangular steel tubes and eight horizontal members made from 50 mm x 50 mm steel tubes. These members can be joined by nuts & bolts at the lab site. The honeycomb surface rests on four heavy-duty bolts on the top of the support system, which can also be adjusted for levelling. The support system is given black finish by epoxy paint.

        Breadboard support size : 900 x 600 x 100 mm
        Height adjustment range +300 mm
        Height adjustment mechanism : Screw adjustment with hand wheel
        Caster wheel and knob locking mechanism
        The leg dimensions : 75 x 75 mm
        A graduation scale in one of the table legs in mm
        The material such as MS square tube, resin bushing and Hardened steel guide rods are used.
        Locking screws for each leg to avoid shake / backlash
        Lift of the table will be uniform in the horizontal plane









Home | Products | Supports | Company | Contact Us

|

©2024 Holmarc Opto-Mechatronics Ltd. All rights reserved.