Products    /    Optomechanics    /    Kinematic Mirror Mounts    /    Top Adjustable Mounts - TABM Series
Top Adjustable Mounts

TABM Series
Corrosion free
Black Anodized Finish


Top adjustable mount helps tilting of optics without causing any obstruction to the beam and takes less space compared to rear adjustable mirror mounts. Optics is held in a stepped bore and tightened by nylon tipped set screw.



Check Our Online Store !
www.e-holmarc.com

Order Now !

    Angular Tip / Tilt     :     +/- 3°
    Translation Range     :     6 mm ( Selected Models Only )
    Linear Resolution     :     0.25 mm ( 100 Tpi )
    Sensitivity     :     4 arc sec.
    Mounting Hole     :     M6
    Mounting Orientation     :     Vertical & Horizontal
    Material     :     Aluminium


Model No. Optics Size Mounting Hole Drawing Price $
TABM-CS-25 25 mm or 1” M6 76.00
TABM-CS-38 38 mm or 1.5” M6   82.00
TABM-CS-50 50 mm or 2.0” M6 89.00
TABM-CS-75 75 mm or 3.0” M6 98.00
TABM-Mu-25 25 mm or 1” M6   108.00
TABM-Mu-38 38 mm or 1.5” M6   115.00
TABM-Mu-50 50 mm or 2.0” M6   122.00
TABM-Mu-75 75 mm or 3.0” M6   143.00

CS Series

Mu Series
< < Select your drive
A - 17 ± 3 A - 24.5 ± 3 25 mm or 1"     CS Series - Covered Lead Screw Drive
    Mu Series - Micrometer Drive
A - 19 ± 3 A - 24.5 ± 3 38 mm or 1.5"
A - 19 ± 3 A - 24.5 ± 3 50 mm or 2.0"




Home | Products | Supports | Company | Contact Us

|

©2025 Holmarc Opto-Mechatronics Ltd. All rights reserved.