Products    /    Optomechanics    /    Kinematic Mirror Mounts    /    Kinematic Mount For Rectangular Optics - KMR Series
Kinematic Mount For

Rectangular Optics

KMR Series
M6 Mounting hole provided
Vertical & horizontal mounting orientation

In KMR series mirror or beam splitter mounts, optics is held in a square pocket machined in the tilting plate of the mount. Nylon tipped soft set-screws are used to tighten the optics in this pocket. Back plate is L shaped. We can use beam splitter, mirror, filter etc. along with this mount.

Two types of KMR series mirror or beam splitter mounts are available. KMR - AK - T series mounts provide translation in addition to tilting in two axis.

    Angular Tip / Tilt :     +/- 3°
    Translation Range :     6 mm ( Selected Models Only )
    Linear Resolution :     0.25 mm ( 100 Tpi )
    Sensitivity :     4 arc sec.
    Mounting Hole :     M6 Tapped / M4 CBR
    Mounting Orientation :     Vertical & Horizontal
    Material :     Aluminium






Model No. Optics Size Mounting Hole Drawings Price $
KMR-AK-25 25 mm or 1" M6   63.00
KMR-AK-38 38 mm or 1.5" M6   70.00
KMR-AK-50 50 mm or 2.0" M6   77.00
KMR-LS-25 25 mm or 1" M6   52.00
KMR-LS-38 38 mm or 1.5" M6   59.00
KMR-LS-50 50 mm or 2.0" M6   70.00
KMR-CS-25 25 mm or 1" M6 52.00
KMR-CS-38 38 mm or 1.5" M6 59.00
KMR-CS-50 50 mm or 2.0" M6 70.00
KMR-Mu-25 25 mm or 1" M6 88.00
KMR-Mu-38 38 mm or 1.5" M6 96.00
KMR-Mu-50 50 mm or 2.0" M6 107.00
Plane Mirror Mount with Translation
KMR-AK-T-25 25 mm or 1" M6 68.00
KMR-AK-T-38 38 mm or 1.5" M6 76.00
KMR-AK-T-50 50 mm or 2.0" M6 83.00
KMR-LS-T-25 25 mm or 1" M6 57.00
KMR-LS-T-38 38 mm or 1.5" M6 65.00
KMR-LS-T-50 50 mm or 2.0" M6 76.00
KMR-CS-T-25 25 mm or 1" M6 57.00
KMR-CS-T-38 38 mm or 1.5" M6 65.00
KMR-CS-T-50 50 mm or 2.0" M6 76.00
KMR-Mu-T-25 25 mm or 1" M6 107.00
KMR-Mu-T-38 38 mm or 1.5" M6 114.00
KMR-Mu-T-50 50 mm or 2.0" M6 125.00

CS Series

Mu Series
< < Select your drive
A - 17 ± 3 A - 25.5 ± 3 25 mm or 1"     CS Series - Covered Lead Screw Drive
    Mu Series - Micrometer Drive
A - 19 ± 3 A - 25.5 ± 3 38 mm or 1.5"
A - 19 ± 3 A - 25.5 ± 3 50 mm or 2.0"


Home | Products | Supports | Company | Contact Us

|

©2023 Holmarc Opto-Mechatronics Ltd. All rights reserved.

Follow us