ISO 9001:2015Made in INDIA

Microscope & Imaging Instruments


    Print
HV-IV Probe System

1. Probe station digital microscope with Post mounting system

    Optical system     Infinity corrected
    Observation Method     Bright field (digital)
    Illumination     Reflected (Co-axial and Angled - 2 Nos)
    Illumination system     High bright white LEDs
    Intensity adjustable Nosepiece     Revolving
    Quadruple with positive precision click stops Focusing     Manual, rack and pinion
    Microscope Objective     1. Long working distance Plan Apo 5X NA = 0.14, Working distance = 40 mm, Field of View = 1.14 mm x 0.856 mm
      2. Long working distance Plan Apo 10X NA = 0.3, Working distance = 31 mm Field of View = 0.57 mm x 0.428 mm
    Effective magnification at sensor     10 X (with 10 X objective) Effective magnification at 14”
    Laptop / PC display     498 X (with 10 X objective) (Depends on the size of the PC / Laptop display)

2. Measurement Jig

    Material :     Brass
    Vacuum provision for sample holding
    Measurement jig will be placed on Teflon base plate
    Teflon stops , HV Connectors

3. Temperature sensor with digital display Model PT100

    Sensor range :     0ºC to 100ºC
    Sensor resolution :     0.5ºC

4. Humidity sensor with digital display

    Resolution :     1 %
    Sensor range :     5% - 95%

5. Base plate with levelling foot

    Material :     Magnetic SS, M6 tapped holes

6. Enclosure for air tight chamber (dry air input provision)

    An aluminium enclosure with hinges will be provided
    Finish :     Black anodised

7. Needle

    Tungsten, 2.4u, BOX of 25
    (Formfactor make, Model PTT-24-25)

8. Camera Specifications

    Optical format :     1/2.5" CMOS
    Active imager size :     5.70 mm x 4.28 mm, 7.13 mm
    Diagonal Active pixels :     2592 x 1944 (5Mp)
    Pixel size :     2.2 x 2.2 um
    Color filter array :     RGB Bayer pattern
    Shutter type :     Electronic Rolling Shutter (ERS)
    Frame rate :     Full resolution - up to 8fps, VGA - up to 70 fps
    ADC resolution :     12- bit, on-chip Pixel dynamic range = 70.1 dB
    Operating temperature :     -30ºC to +70ºC
    Power consumption :     381 mW at 15 fps full resolution
    Software :     Image grabbing software

9. Manual Micromanipulator (4 Nos.)

    Axes :     4 (XYZ and tilt)
    X travel :     25 mm
    Y travel :     25 mm
    Z travel :     10 mm
    Tilt :     +/-3 degree
    Magnetic base
    Probe connectorwith BNC connector
    Probe connector holder (Delrin)
    Provision for HV – IV test

10. Probe Tip 7 MIC

    Tungsten : 25 TIPS (A Pack of 25)
    (Formfactor make, Model 155-202)
    Material :     Tungsten
    Tip radius :     7 um
    Tip angle :     6 degree
    Length :     32 mm
    Shaft diameter :     0.5 mm
logo

Established in 1993, Holmarc Opto-Mechatronics Ltd manufactures variety of scientific and engineering instruments for research, industry and education.

ISO 9001:2015 Made in INDIA

Get in Touch

    B.7., H.M.T. Industrial Estate H.M.T. P.O, Kalamassery, Kochi Kerala, India - 683 503
   +91 938-863-2098
   sales@holmarc.com
   Mon - Sat : 9 am to 5 pm

Privacy Policy | Terms & Conditions
2024 Holmarc Opto-Mechatronics Ltd. All rights reserved.