Microscope & Imaging Instruments
Holmarc’s Digital In-line Holography microscope, model HO-DIHM-T01, is a powerful imaging device that allows for the digital reconstruction of complex objects (amplitude and phase) from a single intensity image captured by passing coherent light through it.
Holmarc’s DIHM is equipped with a transmission type in-line geometry. A coherent point light source illuminates the sample, and a CMOS camera records the 2D interference pattern created by the scattered light (object beam) with non-scattered light (reference beam). The software then computes the field backward to different planes to numerically recreate the samples’ 3D structure from the recorded 2D interference pattern. For 3D reconstruction, the software employs a single shot phase unwrapping algorithm. The DIHM’s broad depth of field allows it to image large volumes with equivalent resolution and to image particles at different depths simultaneously without the use of mechanical scanning.
The HO-DIHM-T01 can be used both in-situ and ex-situ to image particles ranging in size from sub-microns to several millimetres. It records the interference pattern using a 405nm diode laser with pinhole assembly as a point light source and Sony’s 1/1.8” 3.17Mpix CMOS IMX174 sensor. The 134 fps USB3.0 sensor delivers great image quality and low noise performance. The distance between the sample to pinhole and sample to camera is adjustable from the software. A motorized ND filter wheel is provided in front of the laser to adjust the laser power for different sample conditions. DIHM_V01 is an easy-to-use programme that allows you to save, rebuild, and analyse each hologram frame.
Fig. 1. Hologram - Single frame
Fig. 2. Binary particle map
Particle 1 - Amplitude
Particle 1 - Phase
Particle 1 - 3D Phase
-
Particle 2 - Amplitude
Particle 2 - Phase
Particle 2 - 3D Phase
-
Particle 3 - Amplitude
Particle 3 - Phase
Particle 3 - 3D Phase
-
Particle 4 - Amplitude
Particle 4 - Phase
Particle 4 - 3D Phase
-
Particle 5 - Amplitude
Particle 5 - Phase
Particle 5 - 3D Phase
-
Particle 6 - Amplitude
Particle 6 - Phase
Particle 6 - 3D Phase
Established in 1993, Holmarc Opto-Mechatronics Ltd manufactures variety of scientific and engineering instruments for research, industry and education.
ISO 9001:2015 Made in INDIA
Navigation
Get in Touch
B.7., H.M.T. Industrial Estate
H.M.T. P.O, Kalamassery, Kochi
Kerala, India - 683 503
+91 938-863-2098
sales@holmarc.com
Mon - Sat : 9 am to 5 pm